Preview

Agrarian science

Advanced search

The use of composite materials for the manufacture of grain silos

https://doi.org/10.32634/0869-8155-2020-342-10-99-102

Abstract

Relevance and methods. One of the main tasks of grain production in Russia is the storage of harvested grain crops. The growth of grain capacity in recent years has been mainly due to the construction of metal grain storage facilities. This is due to lower capital costs and shorter installation times compared to reinforced concrete silos. The
use of polymer composite materials (PKM) and, in comparison with traditional alloys, provides for a reduction in the weight of the metal structure, an increase in its resource, a reduction in the labor and energy intensity of manufacturing parts by up to 50%, an increase in the strength properties of the structure, a reduction in labor costs during the preparation of production, as well as an increase in the terms of exportation.

Results. The purpose of this study was to review Russia’s grain complex and the tasks it faces, in particular the problems of storage and processing of crops. The main storage method — silos and their structural characteristics — was considered. A comparative analysis of traditional materials with composite ones was carried out and the advantages of the latter were concluded.

About the Authors

V. E. Slavkina
Federal State Budgetary Scientific Institution “Federal Scientific Agroengineering Center VIM”
Russian Federation

postgraduate student, junior scientific employee

Moscow



M. A. Mirzaev
Federal State Budgetary Scientific Institution “Federal Scientific Agroengineering Center VIM”
Russian Federation

postgraduate student, junior scientific employee

Moscow



V. A. Zobov
CECF ELECTRIC TRADING
China

chief engineer

Shanghai



References

1. Smirnov, V.V.; Shamrov, K.N.; Tolmachev, A.V. Aspects of the grain production development regulation and access to the foreign markets (in Russian) // Scientific journal of Kuban State Agrarian University. — 2016. — No.116. — P. 26-39.

2. Vodiannikov, V.T.; Azabi Ahmed Omar Yousef; Borgul, S.V. Modern condition and tendencies of the world grain production (in Russian) // Vestnik FGOU VPO MGAU. — 2013. — No.3. — P. 90-95.

3. Baskakov, I.V.; Orobinskiy, V.I.; Karpenko, R.N. Grain loss during storage in silo type grain storages (in Russian) // Role of agrarian science in development of agroindustrial complex. — 2017. — P. 201-208.

4. Pilyayeva, O.V. Features of the post-harvest grain storage (in Russian) // Era of science. — 2018. — No.14. — P. 189-191.

5. Baskakov I.V., Chernyshov A.V., Chishko R.L., Kharitonov M.K. Modern methods of grain storage in silo storage // Innovative technologies and technical means for agro-industrial complex: materials of scientific conference of faculty, research workers and post-graduates (Voronezh, 2015) / FSBOU VPO Voronezh GAU. Voronezh. — 2015. — P.15-20.

6. Blanco-Valdes Y., Duranona, H., Acosta-Roca R. The effect of temperature and humidity on maize grains conservation in metal silos // Cultivos Tropicales. 2016. — Vol.37. — No.4. — Р.105-114.

7. Lakhoua M.N. Developing New Techniques for Analysis and Control of Silos // Journal of Computer Science and Control Systems. — 2018. — Vol.11. — Issue 2. — Р.18-21.

8. Ajayi E.S., Omodara M.A., Owoyele S.N., Ade A.R., Babarinsa F.A. Temperature Fluctuation Inside Inert Atmosphere Silos // Agricultural, Bioresources, Biomedical, Food, Environmental & Water Resources Engineering. — 2016. — Vol. 35. — No.3. — Р.642-646.

9. Ionut O.T., Ciocan V., Boboc A., Pruteanu M., Munteanu V., Ciprian I.C., Balan M.C., Toma A.M. Coatings Innovations on the Inner Shell of Metal Grain Silos // Advanced Engineering Forum. — 2017. — Vol.21. — Р.207-212.

10. Dixit S., Goel R., Dubey A., Shivhare P.R., Bhalavi T. Nature Fibre Reinforced Polymer Composite Materials // Polymers from Renewable Resources. — 2017. — Vol.8. — Issue2. — Р.80-86.

11. Novikov, D.S.; Lyashkov, D.V. Composite materials and their use in industry (in Russian) // Youth science in regional development. — 2019. — T.1. — P.174-177.

12. Potapova, K.A.; Leyer, D.V.; Mugu, A.A. Mechanical properties and fields of application of the polymer composite materials (in Russian) // Scientific support of agroindustrial complex. — 2019. — P. 305-306.

13. Lakhoua M.N. Developing New Techniques for Analysis and Control of Silos // Journal of Computer Science and Control Systems. — 2018. — V. 11. — Issue 2. — Р.18-21.

14. Savitskiy, Ya.A. Fiberglass plastics and their use (in Russian) // Scientific research: vectors of development. — 2019. — P.107-108.

15. Antonova, T.G. Structure and application of fibreglass plastic as a high-tech composite material (in Russian) // Composite building materials. Theory and practice. — 2017. — P.5-9.


Review

For citations:


Slavkina V.E., Mirzaev M.A., Zobov V.A. The use of composite materials for the manufacture of grain silos. Agrarian science. 2020;(10):99-102. (In Russ.) https://doi.org/10.32634/0869-8155-2020-342-10-99-102

Views: 410


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 0869-8155 (Print)
ISSN 2686-701X (Online)
X